Optimize Your Payload
  • Increase Driver Productivity. Drivers can take a measurement in the truck cab, the loading area, or up to 500 feet (155 meters) away.
  • Maximize axle loads. TruckWeight Wireless Truck Scales are accurate to within 0.3% of actual gross vehicle weight or 150lbs.
  • Two Year Warranty
  • Low-powered radio signals are intrinsically safe.
  • Eliminate overweight fines, time spent redistributing loads, and out-of-route miles for check-weighing.
  • Decrease operating expenses. Consistently optimize payloads quickly and with confidence.
  • Simple 10 minute installation. No wires or cables. Eliminate expense and downtime associated with a hardwired scale installation.
  • All scales operates with two "AA" batteries and weigh only 12 oz.
  • All scales are completely non-corrosive.
  • No spare parts are required.
  • Truckweight Wireless Truck Scales operate in -40°F to 158°F
  • Built for high vibration environments


What do I need to buy for my Rig? : We can out-fit any Rig configuration

  • 2 Air Suspension Sensors
  • 1 Wireless Handheld

  • 1 Air Suspension Sensor
  • 2 Mechanical Suspension Sensor
  • 1 Wireless Handheld

  • 3 Mechanical Sensor (one on front axle and one on each side of drive axle(s)
  • 1 Wireless Handheld
    •  

  • 1 Mechanical Sensor on front axle
  • 1 Air Sensor on drive axle(s)
  • 1 wireless Handheld

  • 3 Air Sensors (1 on the drives, 1 on the forward trailer, on the rear trailer)
  • 1 wireless Handheld

  • 3 Air Sensors (1 on drives, 1 on Jeep, 1 on trailer)
  • 1 Mechanical Sensor (1 on stinger)
  • 1 wireless handheld
    • AIR SUSPENSION SENSOR

    TruckWeight Air Suspension Sensor measures both temperature and pressure to provide per axle group weight and gross vehicle weight (GVW). All measurements are accurate to within 0.3% of GVW. One air suspension sensor is required per axle group or per leveling valve. Two sensors are required if the truck is equipped with leveling valves one for each side of the truck.

    MECHANICAL SUSPENSION SENSOR

    TruckWeight Mechanical Suspension Sensors provide measurements to within 1% of GVW by accurately measuring the deflection of the axle and provide per axle weights. TruckWeight Mechanical Suspension Sensors work on the fork arms of front end loader refuse trucks, on pay loaders, walking beam suspension systems and rigid trucks.

    WIRELESS HANDHELD

    TruckWeight Wireless Handheld Weight Display provides weight readings up to 500 ft (155 meters). Take advantage of the rugged weather proof, wireless handheld to accommodate your loading needs. Each Wireless Handheld works with multiple sensors including Mechanical Suspensions, Air Suspension and Forklift Scales. Handheld Case Included. Handheld Mount optional.